"be the first to know instead of the last"
monitor your spouses sexual activity outside of the
"if they did it, it's there"
detects traces of semen that are left in undergarments
performs 4-5 tests
designed to work on any type or color of material
will not damage or stain the material being tested
guaranteed 100% effective
results in five minutes
two bottles of liquid transfer medium
two bottles of CheckMate reaction component
ten Lift Trace papers
two packaged applicators
frequently asked questions sheet
complete and detailed instruction sheet
If you can actually see the suspected
stain, use the supplied dropper and remove a small amount of the liquid
from bottle #1 and wet the suspected stain. This only takes 1-2 drops. If you
can't see a stain, but suspect one may be present, simple wet the suspected
area. Allow the liquid to soak into the fabric. If you are doing a side-by-side
test with a known sample, you should also place 1-2 drops onto this stain now
too. after the liquid has soaked into the fabric tested, proceed to step two
immediately before the fabric has any chance to dry.
Using one of the supplied blotting papers, simply blot the
entire wetted suspected test area with the paper by pushing down gently in
different places until the paper is thoroughly wetted. If semen is present, this
transfers it from the material being tested to the blotting paper - so let the
paper soak up the liquid. Now set the paper aside to dry. If you are doing a
side-by-side test with a known sample, do the same as above, but with a
different piece of paper and set it aside to dry also. You must make sure to do
this after - not before - you do the suspect test. If you were to do the
blotting part of the test on the known semen sample first, you could contaminate
the suspect test paper. So, if you decide to do the side-by-side test, always do
the suspect test first.
Using the supplied dropper, remove 10 ml of the liquid from
bottle #1 and mix it with the contents of bottle #2. Shake for at least 30
seconds to mix completely.
For the last step, you must time yourself carefully. Don't
guess. Use a timer or a watch with a second hand. After blotting the paper has
dried, shake bottle #2 again and using the dropper, extract a small amount of
the fluid from the bottle. Place a small amount of the liquid onto the suspect
blotting paper (1-3 drops). If you are doing a side-by-side test. place a small
amount of the fluid onto the known sample at the same time. As soon as you place
the liquid onto the paper, start looking at your watch. if semen is present, you
will see a purple color start to appear on the paper immediately. if semen is
present, you will see this start to happen within 15 seconds or less. If the
purple does not appear within 15 seconds, it is not a positive test and no
traces of semen are present. Any red, yellow or even slightly purple coloring
that appears after an extended time is definitely not a positive test result. No
traces of the test will be left behind on the material being tested. If you are
not concerned with staining the material and it is a light color like white, you
can place the fluid mixture directly onto the suspected test area. The same
procedure should be followed as to the timing part of the test. If semen is
present, even in the smallest trace amounts, you will see the purple color
appear within 15 seconds.
Tips and Hints
When using CheckMate, timing is very important. If you suspect
your female partner of having sex with someone other than yourself, you must
make certain you have had no sexual intercourse with her for at least seven
days. Semen can be detected even after showering for up to 72 hours or more, so
be sure that you have had no relations with her for the specified time period.
Failure to follow these guidelines could possibly result in a false positive
test result. Everyone's situation is different, but use common sense when using
this product. CheckMate tests for only the presence of semen, not who it came
Timing is the most important factor for the proper use of this
product. For women using this test on a man, you must consider things like
masturbation and personal habits and hygiene. CheckMate is very easy to use.
Just wait until the right time to do the test. Everyone's situation is
different, but a good example would be if he takes a shower, puts on clean
clothes and goes out with the boys every Friday night, then Saturday morning
would be a good time to do the test.
Of course, undergarments are the best place to test, but only
you will know when is the right time. Everyone's situation is different. Just
follow the easy instructions.
Shopping Cart Software by AbleCommerce