FREE SHIPPING for all US Orders over $145
Alcomate AccuCell AL9000 Fuel Cell Digital Alcohol Breathalyzer
Breathe into the mouthpiece and read your blood alcohol level
Advanced Fuel Cell alcohol sensors
Maximum precision and accuracy
Ability to handle rigorous high-volume testing without issue
DOT Approved: Accuracy +/- 0.005% BAC
Easy one-button operation
Trusted for use by DOT (Department of Transportation) and NHTSA (National Highway Traffic & Safety Administration), law enforcement, medical professionals, school administrators, corporate employers, drug rehabilitators and parents
FDA 510(k) Cleared
Meets US Coast Guard requirements
ISO 9002 Certified
Detection Range 0.000% ~ 0.400 BAC
Accuracy +/-0.005 BAC
Analysis Time: 10 Seconds or less up to 0.100% BAC
Recovery Time: ~ 1 Minute between consecutive tests
No recalibration required until 500 tests or one year
Increased durability for high-volume testing
Sold Separately: Software CD, USB cable - allows you to operate the device and export results to an Excel spreadsheet (Windows XP only)
Active pressure sensor
Deep-lung air sampling
Cumulative test counter
Size: 106 x 50 x 20 mm
Weight: 2.8 oz including batteries
Audible alerts
Low-battery indicator
Battery Charge: 500 Measurements
One-way-flow mouthpieces
Self-diagnostic system
Auto power off
6-month warranty
digital breathalyzer
five mouthpieces
complete and detailed users manual
hard case
carrying pouch
two AAA batteries
hand strap
Instructions
Press the power button.
Unit will warm up until it displays the "blow" sign.
Blowing through the mouthpiece into the unit for 4 seconds until beep twice.
The result is displayed for 15 seconds. If you want to test again, press the power button after the back light goes off.
Unit automatically turns off after 2 minutes.
Notes
The only legally valid measure of % BAC (percent Blood Alcohol Concentration) is obtained by blood testing or other evidential method of measurement. This device is for screening purposes only and should be used as a monitoring guide. This device must be used strictly in accordance with the instructions provided with the product.
If you press and hold the power switch, you can check the accumulated total test counts.
Wait at least 20 minutes after eating or drinking before testing A breathalyzer examines “lung air” samples, not “mouth air” to calculate alcohol content. Any “contaminants” in the mouth, including alcohol, food, smoke, or even excess saliva, may interfere with testing. This includes alcohol-based mouthwash or similar products. This is the most common cause of improper use and incorrect results.
Avoid testing in high wind or enclosed spaces. Poor ventilation may also lengthen the time required for warm up between tests.
Do not blow smoke, saliva or other contaminants into the mouthpiece, as the sensor may become damaged.
Do NOT use as a tool to drink and drive.
Keep out of extreme temperatures and out of the reach of children.
If you see “Flow” in the display, the breath sample was not strong or long enough for measurement. As soon as you start blowing into the device, you will hear a long beep indicating how long you should blow.
If you see “Bat” in the display, the battery power is low. Please replace the batteries.