Product Details
More Powdered Urine Kit Details
- More Powdered Urine Kit Details
- One vial containing powdered urine
- One 50 ml plastic medical transport vial with blue lid
- Two air-activated heaters
Instructions
- Pour the powdered urine in the small vial into the larger 50 ml tube.
- Slowly fill the tube with water to the very top, screw the blue cap on tightly and shake until the powder is completely dissolved.
- Apply the temperature strip on the front of the 50ml tube. Open the heater package, peel the paper off of one heater and stick it to the back side of the tube, directly opposite the temperature strip.
- Before conducting your experiment, verify the temperature is within the correct range (90-100F/32-37C).
Tips and Tricks to pass the urine drug test
- Always call or email in advance of your experiment if there are any questions. Don't guess, ask.
- Before conducting the urine test simulation, you MUST verify that the urine temperature is between 90-100F/32-37C. Any sample outside of that temperature could possibly cause an invalid experiment.
- We suggest you start with room-temperature instead of hot or warm water because the heater we give you brings the water up to the correct temperature range on its own. Use one heater, unless you want to get to the proper temperature faster.
- If you do not see any reading on the temperature strip, it is not broken. The urine is either too cold or too hot. The temperature strip is highly accurate, reusable, and the highest quality component of the kit.
- If the urine is too cold, be patient and let the heater raise the temperature. If the urine is too hot, remove the cap and heater and gently blow on the urine until it comes into the correct range.
- Practice cooling the water. Take the tube on its own, go to the sink and put in hot water, driving the temperature off the scale above 100 degrees F. Gently blow on the liquid until you see the rainbow temperature indicator come into the 90 to 99 degree range.
- This does two things: It lets you see that rainbow indicator on the temperature strip and gives you experience with bringing the temperature down, just in case the temperature rises above 100 degrees.
- Be sure the heater is not too close to the temperature strip, or the strip will be measuring the heater instead of the water. For a snug fit between the heater and tube, use rubber bands or adhesive tape.
- Unless the urine is too hot, do not take the heater off the tube, or the temperature will eventually fall out of the required range of 90 to 99 degrees.
- Don't jump the gun. These heaters are single-use, so be positive about when your test will take place before preparing the kit.
- If your experiment requires more than 50 ml, take a small vial of water with you, so you can dilute the sample up to the minimum level of 75ml. Be careful not to affect the temperature too much.
- After the urine is ready, here's how to conceal it: Women can use the bra area or adapt to the method men use, which is to wear two pairs of briefs/tight underwear, and slip the tube between the layers. If the tube is in a warm place against the body, the temperature should remain within the correct range for about 30 minutes.
- Extra heaters are available at the time of purchase. They are highly recommended in case the test gets delayed.
- A digital thermometer is also available at the time of purchase. Some people find it helpful in order to provide a wider temperature reading than the strip is capable of. This option is highly recommended for first time users.
- An option for extra vials (either 50 ml or 15 ml) is handy when extra volume is needed. Technically, you only need drops to conduct your experiment with, but extra volume is useful if you want to impress the audience. You can dilute the powdered urine that we give with 50 percent more water (25 ml) without causing any adverse effects.
Is Powdered Urine Real Urine?
The kit contains powdered urine that has the qualities of real, drug-free human urine. This urine in powder form has uric acid and other compounds present in authentic human urine.
The real powdered urine kit is also different from liquid synthetic urine or fake pee advertised in other fake urine kits.
How Do You Use Clear Urine Powder?
Follow these steps to use the powdered urine kit for your experiment, simulation, or pre-employment drug test:
-
Pour the vial of powdered urine into the tube, which is included in the kit.
-
Stick the temperature strip, which also comes with the kit, to the tube.
-
Fill the tube with water that should reach to the top of the container and put the cap on tightly.
-
Shake the tube to dissolve the powdered urine.
-
Stick the heater to the backside of the tube.
-
Verify the temperature and submit.
For detailed instructions and tips, check out the product pamphlet and this page.
How Do You Pass Fake Urine for a Drug Test?
This powdered urine kit is ideal for unsupervised drug tests. Confirm the testing details to make the necessary preparations for the urine drug test at home or in the facility’s bathroom. Ensure the urine sample is in the correct amount and within the right temperature range to be a valid specimen.